Tororullopacker REV00 R04.264

Galerie Poze & Video


110-280 kW (150-380 HP)

The market demand for increasingly high performance equipment but at the same time versatile and reliable led the Maschio Gaspardo R&D team to revise the HD power harrows range. The main changes have affected the structure of the rotors and transmission groups. Larger sections and always more resistant and reliable bearings allow to increase the loading power of up to 20%.

Lățime de lucru
Lățime totală
Adâncime de lucru
Număr de lame
5000 118-294 / 160-400 500 512 28 40
6000 133-294 / 180-400 600 612 28 48
7000 184-294 / 250-400 700 712 28 56
  • Central 1000 rpm gearbox with 3 tapered gears and rear PTO
  • Air cooled central and side gearboxes
  • Side gearbox pre-setted for 350 rpm
  • Standard pair of gears: 19-26
  • Rotor revolution PTO 1000 rpm: 350
  • Gearbox lubrication with synthetic oil
  • Central gearbox ground clearance: 85cm
  • Central direct PTO shaft
  • Cam side PTO shafts
  • Quick PTO shaft protection removal
  • Heavy duty gear-tray with double reinforcement
  • Heavy duty spherical roller bearings
  • Round blade-holders
  • 2 blades per rotor
  • Quick blade release, 16mm thickness
  • Bolt-on steel deflectors (PLUS)
  • Long dampened side protections
  • Universal adjustable three point hitch III^ and IV^ cat.
  • Rear lights for transport (disassembled)
  • Hydraulic folding system
  • Safety hydraulic locks for transport
  • Folded power harrow width: cm 240
  • Central eradicator
  • Pre-disposed for double pair of sliding track eradicators
  • 2 hydraulic roller side adjusters
  • Rear levelling bar on the roller with mechanical side adjusters
  • Transport protections
  • «CE» safety guards (supplied assembled)
  • Version 7000 4 hydraulic roller side adjusters
  • Sleeve kit for cat. IV
  • Quick coupler III^ - IV^ cat.
  • Hydraulic seed drill hitch (only for 4000, 4600, 5000 versions)
  • Sliding support for double pair of track eradicator
  • Pair of track eradicators with pin adjustment and safety shear bolt
  • Pair of track eradicators with pin adjustment and safety spring
  • Pair of track eradicators with DELTA tip, pin adjustment and safety spring
  • Rear roller depth indicator
  • Rear levelling bar hydraulic adjustment kit
  • Floating device kit for downwards oscillation
  • Additional 8 tubes for cage roller Ø 450 - Mod. 5000 (2 kits required)
  • Additional 8 tubes for cage roller Ø 450 - Mod. 6000 (2 kits required)
  • Additional 8 tubes for cage roller Ø 450 - Mod. 7000 (2 kits required)
  • Hydraulic transport trolley
“RAPIDO” quick fit system - easy tines replacement Open Close

Rapido quick fit system

“RAPIDO” quick fit system - easy tines replacement

QUICKFIT tine system allows the user to replace tines quickly with one turn of the QUICKFIT tool, this minimises downtime and increases safety.

Heavy Duty wings’ frame Open Close

img 4telaio robusto

Heavy Duty wings’ frame

The frame of new folding power harrows has been improved to be more resistant to heavy and continuative stresses. Hydraulic cylinders have an auto balancing system to control the depth of the rear roller and make sure it always runs level.




QUICKPLUS is a bolt on shield system. Assembling deflectors among the rotors-gear trough clearance, those prevents: stones, twines and debris colliding and wrapping on the rotors shafts. Remove deflectors is quick and easy to operate in no-stony conditions improving soil and residues flow.

Heavy Duty seal Open Close

paraolio poliuretano

Heavy Duty seal

The special design of seals, made of rubber and cellular polyurethane guarantees a perfect sealing and long durability.

Low vibrations Open Close

rotors power harrow

Low vibrations

The tine rotors are all positioned at different angles which allow the power harrow to gradually dig into the soil reducing the vibration transmitted to the tractor and reducing peak loads on the driveline resulting in smoother operation and less fuel consumption.

Special roller parallel linkage COMBI system Open Close

img10applicazioni rullo combi

Special roller parallel linkage COMBI system

Power harrow can be easily coupled with a seeding bar either with packer or rubber rollers.

Number of rotors Open Close

img 3numero rotori

Number of rotors

25 cm spacing among the rotors gives Maschio Power Harrows more rotors than many other power harrows on the market today, it also lowers the horsepower requirement and most importantly leaves a finer seed bed.

Long life bearings Open Close

Bearing barrel bearing cuscinetti orientabili a rulli

Long life bearings

Each bearing has a double rail consisting of two rows of spherical or barrel bearings to cope with heavy workloads. Main Advantages: long Life (Up to 30% longer than traditional tapered roller bearings), high load capacity, easy maintenance (no preloading needed).

Tine shaft Open Close

Power harrow shaft Maschio

Tine shaft

Maschio’s basic rotor design is replicated throughout the range: tine shaft are made from a single casting of pressed steel. This confers rotors higher precision and durability comparing to alternative manufacturing.

On grip tines Open Close


On grip tines

The ON-GRIP tines are ideal for working in hard uncultivated soils with crop residues. Due to the shape of the blades you get excellent mixing of soil, it also leaves a large proportion of the large course soil on the surface preventing the top layer of soil creating a water tight crust.
Tungsten coated tines are suitable for abrasive soils: standard dotation on Jumbo, they are available as optional on other models. 

Oil cooler Open Close

img 11raffreddamento

Oil cooler

Our Heavy Duty folding harrows are equipped with a cooling fan in the side gearboxes.
Thanks to hardened gears, synthetic oil and the cooling system, the gearboxes achieve excellent performance even under the hardest working conditions of prolonged high temperatures.

Gearbox Open Close

gearbox cambio velocit


Main gearbox is critically important to the machine, so it is made directly by Maschio Gaspardo to ensure consistency, strength and quality. Spare gears are available on machines to change rotation speed of tines.

Reinforced trough Open Close

double skin trough

Reinforced trough

Double skin structure (internal shell 6 mm, external 5 mm) increases strength, prevents torsion and protects the workings from damage


Document Dimensiune Tip
3.7 MB pdf

Formular solicitare